We use cookies to continually improve our website. The further use of our website confirms your acceptance of these cookies. More information Close
Sauerland Spanplatte


The requirements on the heat insulation of building components are stated in ´the Heat Insulation Regulation´ according to DIN 4108 (German Standard).

Calculation of the heat transition coefficient

The heat transmission resistance
The heat transmission resistance can be assumed as follows according to DIN 4108, Part 4:

Thermal resistance
The thermal resistance is strictly proportional to the thickness of the building component and is calculated as follows:

s=thickness of the building component
λR=factor of the conductibility
(see table)

Heat transition resistance
The transition resistance of a building component is calculated by addition of the heat transmission resistances to the thermal resistance as follows:

Heat transition coefficient
The heat transition coefficient is equivalent to the reciprocal of the heat transition resistance and can be calculated as follows:

Calculation examples, Factors

The factors of conductibility of the applied materials are the basis of calculation as per the following table:

Soft Wood (Spruce)
Particle Board (FPY)
Hard Fibre Board
Soft Fibre Board
Tubeboard with
55% solid content
about.   450
about.   700
about. 1000
about.   300

about.   500


The heat transition coefficient ‘k’ of a door blank with a Tubeboard core can be calculated as follows:

Thickness of door blank = 40 mm = 0,04 m
Conductibility λR about. 0,12 W/mK
(calculated, as multilayered)

Heat transmission resistances


The k-value of a 40mm thick door blank made of wooden materials meets the minimum requirements on flat entrance doors according to DIN 4108, Part 1: